Flush-Mounted Floor Hatch

Model  “Comfort 01 ”
load bearing capacity 500 kg
gas spring-assisted opening
moisture-resistant gypsum fiberboard
sealed and insulated design
anti-corrosion powder coating
durable metal construction
100% invisible (1 mm seam)
Size and Price
  1. reinforced frame, height 100 mm
  2. anchor 8×100
  3. concealed hinges
  4. gas struts
  5. rubber seal
  6. latch lock
  7. foam insulation 30 mm
  8. moisture-resistant gypsum fiber board 10 mm
  9. tile (max.15 mm)
  10. tile adhesive
  11. metal sheet
  12. tile edge cut 60°
How to Choose
Installation Instructions
Technical Specifications
Model  “Comfort 02 ”
Stainless steel version of Comfort 01
Model  “Comfort 03 ”
Floor hatch with metal sheet cover
Model  “Comfort 04 ”
Electric lift floor hatch for tiles
How to choose:

The"Comfort" concealed floor hatch is used indoors to provide access for inspection or to a basement.

How to Select the Hatch Size:
  1. Measure the required opening size for inspection or basement access.
  2. Measure the floor tile dimensions.  
  3. Compare the required opening and tile sizes (consider tile layout).  
  4. Choose the hatch size accordingly.
Note:

The hatch size refers to its outer frame. The lid is smaller (see table).

Attention!

If you use other floor finishes, have a non-standard opening, or need a custom design – contact a manager.

+38 (097) 107 11 07
Installation instructions:
1
Purposeand Application:

The floor hatch is designed for indoor use to access technical systems or floors between levels in residential or industrial buildings.

2
Technical Specifications:

• Made from precision steel for strength and accuracy.
• Powder-coated for enhanced corrosion resistance.
• Insulated with 30 mm foam and lined with moisture-resistant gypsum fiberboard(GVLV).
• Rubber gasket ensures airtight sealing.
• Equipped with gas struts and a latch lock for ease of use.

3
Installation Process:

3.1. Prepare the opening according to the outer frame size.

3.2. Insert the closed hatch and align the lid with the floor surface.

3.3. Open the lid and fix the hatch through 8 mm mounting holes using anchors or screws.

3.4. Prime the floor and hatch surface, apply adhesive (sealant for metal parts), and tile with a 60° cut along the hinge side. The tile and adhesive thickness should not exceed 15 mm.  

Note*

To avoid lock damage, retract the latch before closing. Do not step on the lid before tiling. Periodically lubricate moving parts with technical oil.

3.5. After drying, drill a 12 mm hole above the lock and bevel the edges at 60° for the cover cap.

Table of sizes and parameters of standard floor hatches
Hatch size (WxL mm)
Opening size
(WxD mm)
Cover size (WxL mm)
Hatch dimensions (WxDxH mm)

600x600

560x500

600x540

600x600х105

700x600

660x500

700x540

700x600х105

800x600

760x500

800x540

800x600х105

700x700

660x600

700x640

700x700х105

800x700

760x600

800x640

800x700х105

800x800

760x700

800x740

800x800х105

900x700

860x600

900x640

900x700х105

900х900

860x800

800x840

900x900х105

1000х700

960x600

1000x640

1000x700х105

1000х800

960x700

1000x740

1000x800х105

Cost of Comfort 01 model hatches
Hatch size
(WxH mm)
Price (UAH)

600х600

11900

700х600

12200

700х700

12500

800х600

12550

800х700

12750

800х800

13050

900х700

13100

900х900

13700

1000х700

13650

1000х800

14000

+
Leave your contact details and we will call you back
Your details have been successfully submitted.
We will call you back shortly.
An error has occurred.
Please resend the data.